LSI Logic SAS 3442X-R 3Gb/s 8-Port PCI-X Host Bus Adapter Kit

l> #3Gb/s per port #4x Internal SFF-8484 connectors; 4x External SFF-8470 connectors #Integrated RAID 0, 1, 1E and 10E #MD-2 small form-factor design #Connects to both SAS and SATA HDDs and tape drives #Allows more than 122 total end-point devices #Fusion-MPT architecture provides more than 140,000 I/Os per second #Supports all major operating systems #PCI Bus: 64-bit, 133MHz PCI-X, backward compatible with PCI #PCI Modes: Bus master DMA #PCI Data Burst Transfer Rates:

#132MB/s (PCI 32-bit bus @ 33MHz) #264MB/s (PCI 64-bit bus @ 33MHz) #528MB/s (PCI 64-bit bus @ 66MHz) #800MB/s (PCI-X 64-bit bus @ 100MHz) #1064MB/s (PCI-X 64-bit bus @ 133MHz) #SAS Bandwidths:

#Single lane - 300MB/s #Wide port (2 lanes): 600 MB/s #Wide port (3 lanes): 900 MB/s #Wide port (4 lanes): 1200 MB/s #Wide port (8 lanes): 2400 MB/s

#Single SAS lane - 600MB/s #Wide port (2 lanes): 1200 MB/s #Wide port (4 lanes): 2400 MB/s

#PCI Card Type: 3.3V add-in card #PCI Voltage: +3.3V ± 0.3V #PCI Power: 7.5 W #Bracket: Full height and low-profile #Certification Level: PCI 2.2, PCI-X 1.0a, PCI-X 2.0 mode1 #SAS Bus: 4x 3GB/s SAS/SATA ports #SAS Processor: LSISAS1068 #Connectors: Internal - 1x SFF-8484 SAS connector; External - 1x SFF-8470 SAS connector #LED Indicators: Internal Activity per Phy - 4; Internal Fault per Phy - 4 #Integrated RAID Levels: RAID 0, 1, 1E and 10E #Max No. of Physical Devices:

#Non-RAID: 122 #Integrated (RAID): 10 spread across 2 volumes #IR RAID 0: 8 per volume #IR RAID 1: 2 per volume plus hotspare #IR RAID 1E: 8 per volume #IR RAID 10E: 8 per volume #Software: MyStorage - Drive monitoring, HBA management, drive topology #OS Support:

#Microsoft Windows 2000, Server 2003 32-bit (x86 and AMD64), XP #Red Hat Linux RHEL 3 #Novell NetWare/SLES #Sun SPARC Solaris 2.6 thru 2.10 #MTBF: > 200,000 hours #Compliances: EMC - Class B-US (CFR 47, P15B), Canada (ICES-003), Japan (V-3/02.04