On-board PowerPC RISC processor provides true hardware RAID (SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives)
Bootable
Additional Specification :
i>7th-generation StorSwitch™ point-to-point, non-blocking switched architecture #On-board PowerPC RISC processor provides true hardware RAID (SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives) #Bootable array support for greater fault tolerance #Variable stripe size for performance tuning by application #64-bit LBA support #ATA pass-through mode support #Upto 256MB DDR2 400 memory with ECC protection #32 pooled DMA channels #Complete configuration management suite #SNMP support #SMTP support for email/pager notification #ATA/6 and Out of band (OOB) staggered drive spin-up support #Auto carving allows logical units larger than 2TB to be divided into multiple units for legacy operating systems that are limited to a maximum of 2TB per logical unit #StorSave platform for advanced performance tuning with the BBU #Multiple logical unit sizes and RAID levels on one card #Multiple card support within a system for large storage requirements #Hot-swap and hot-spare support for data availability #Dynamic sector repair for robust data protection #S.M.A.R.T. disk drive monitoring for reliability #Emergency Flash Recovery protects against failed firmware upgrade #Drive activity LED support #Online Capacity Expansion and RAID Level Migration #Battery Backup Unit (BBU) ready #Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal #Drive insertion and removal notification #Array/Drive Status and drive identification LED support #Chassis Control Unit for enclosure management via I2C #Low operating temperature at full utilization #Form Factor: Half length #Port Count: 12 #Host Interface: PCI-X #Host Interface Speed: 64-bit/133MHz #Onboard Memory: 256 MB #Connector Type: Discrete #Dimensions(LxH): 6.875 x 4.2 inch / 17.463 x 10.668 cm
