|
|
|
|
|
|
Multimedia>>Sound Card>>SC-XFI-ELI |
|
| Creative Labs Sound Blaster X-Fi Elite Pro 7.1 |
|
|
|
|
|
|
|
|
|
| Description : |
|
24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate#24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output.24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output.16-bit to 24-bit recording sampling rates: 8
|
| |
|
|
| Features : |
|
24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
24-bit Digital-to-Analog conv
|
| |
|
|
| Specifications : |
|
Mfr Part Number: 70SB055000002Technical Specifications:24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHzASIO 2.0 support at 16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz 24-bit/48kHz and 24-bit/96kHz with direct monitoring.Enhanced SoundFont support of up to 24-bit resolution64MB of X-RAMAudio Performance (Rated Output @ 2Vrms, Typical Value)Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted); Stereo Output 116dB; Front and Rear Channels 116dB; Center, Subwoofer and Side Channels 116dBTotal Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.0008%Frequency Response (-3dB, 24-bit/96kHz input ) = <10Hz to 46kHzFrequency Response (-3dB, 24-bit/192kHz input) = <10Hz to 88kHz (Stereo only)Connectivity:FlexiJack (Performing a 3-in-1 function, Line In / Microphone / Digital Out) via 3.50 mm minijackLine level out (Front / Rear / Side / Center / Subwoofer) via 3.50 mm minijacksAUX_IN line-level analog input via 4-pin Molex connector on cardOne AD_Link (26 pin) connector for linking to the X-Fi I/O Console (upgrade option)I/O Console Connectivity:Two RCA jacks for coaxial SPDIF input and outputShared Auxiliary input / Phono input via RCA stereo jacksTwo optical connectors for optical SPDIF input and outputTwo standard MIDI female connectors for MIDI input and outputHeadphone output and volume control via 6.35 mm (1/4-inch) stereo jackShared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo jackShared line-level analog Line/Hi-Z input via 6.35 mm (1/4-inch) stereo jackDIN jack to connect Creative analog speaker systems with the wired remote control or Audio Control Pod that comes with the speakers.One AD_LINK connector for linking to the audio cardPackage came with Sound Blaster X-Fi Elite Pro PCI Card, X-Fi I/O Console, and Remote Control
|
| |
|
|
|
|
|
|
|
|
|
|
