Antec SP-500 500W 24/20/6pin 4-SATA ATX12V v2.0 Power Supply

l> #Dual 80mm fans in flow-through configuration #Unique Dual Fans Design: The external exhaust fan starts, stops and adjusts its speed in response to system temperature, while the other fan is temperature-regulated #Dual +12V output circuitry for stability and safety #Advanced Cable Management system allows you to use only the cables that are needed #Serial ATA connectors #PCI-E graphics card connector #Switches: ATX Logic on-off; Additional power rocker switch #Maximum Power: 500 W #Transient Response: +5V,+12V and 3.3V outputs return to within 5% in less than 1ms for 20% load change. #P. G. Signal: 100 ~ 500 ms #Over Voltage Protection (recycle AC to reset): +5V trip point < +6.2V; +3.3V trip point < +4.1V; +12V trip point < +14.3V #Special Connectors: ATX12V; 3-pin Fan Sensor; SATA; PCI Express #Leakage Current: <3.5mA @ 115VAC #Input:

#Input Voltage: 100 ~ 240 Vac ±10% #Input Frequency Range: 47 ~ 63 Hz #Inrush Current: 640A @ 115V; 100A @ 230V #Input Current: 12A @ 115V, 6A @ 230V #Hold-up Time: 20ms at full load #Efficiency: 70%(min.) at full and typical loads, 115V/230Vac #EMI/RFI: FCC Class B #Output:

#+5V, +12V1, 12V2 and +3.3V maxload: 480 Watts #+5V and +3.3V combined output: 180 Watts #Fan: 2x 80mm fans #Connectors: 24/20/6/4 pins; 4x SATA Connectors; PCI-Express Graphic Connector (SLI Approved) #MTBF: 80,000 hours at 25°C #Safety Approval: TUV, UL, CUL, CE, CB, FCC #Dimension (WxDxH): 5.9 x 6.1 x 3.4 inch / 14.9 x 15.8 x 8.5 cm #Weight: 5 lbs / 2.3 kg