fr Part Number: FSP270-50SNV#Features: # Passive PFC(Power Factor Correction) circuit at 230 V AC#High efficiency#Low ripple & Noise#Output over voltage protection#Short circuit protection on all output#Safety approved: CSA, UL, IEC, TUV, NEMKO, CE#100% burn-in under high ambient temperature (50XC
Detailed Features
l> #Passive PFC(Power Factor Correction) circuit at 230 V AC #High efficiency #Low ripple & Noise #Output over voltage protection #Short circuit protection on all output #Safety approved: CSA, UL, IEC, TUV, NEMKO, CE #100% burn-in under high ambient temperature (50XC) #Vacuum-impregnated transformer #MTBF: 100K hours at 25°C #100% Hi-pot tested #Line input fuse protection #With 8cm fan #Input:
#Total Watts: 270 W #Connectors: 1x 20pin main power; 1x 4pin P4; 3x peripheral; 1x floppy #Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby) #Transient response: output voltage recovers in less than 1 ms max. following a 25%load change #Hold-up time: 10.0ms minimum (at 230V / 50 Hz) #Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second #Efficiency: 65% min. at full load #Power good signal: turn-on delay 100~500 ms #Over voltage protection: +5V, +3.3V, +12V #Dimension (WxLxH): 125 x 130.3 x 63.5 mm
Your opinion is important to us.If
you have spotted a typo, discovered an incorrect price, or encountered a
technical issue on this page, we want to hear about it. Thanks again for your
feedback
