fr Part Number: FSP200-50PL-B#Features# Complied with Flex ATX and ATX12V standard#High efficiency and reliability#Remote On/Off function#Internal 12V DC fan included#Noise Killer (Thermal fan speed control function)#Low noise and ripple#Complies with FCC part 15 subpart J Class B and CISPR 22 Cla
Detailed Features
#Complied with Flex ATX and ATX12V standard #High efficiency and reliability #Remote On/Off function #Internal 12V DC fan included #Noise Killer (Thermal fan speed control function) #Low noise and ripple #Complies with FCC part 15 subpart J Class B and CISPR 22 Class B #Output over voltage, short circuit, and over current protection #100% Hi-pot, ATE, and burn-in tested #Re-settable power shut down #Approved by UL 1950, CSA C22.2 Level 3 #Input:
#Input Range: 90 ~ 132 / 180 ~ 264V AC, Manual Selection #Frequency: 47 ~ 63 Hz #Input Current: 5A (RMS) @ 115V AC, 3A (RMS) @ 230V AC #Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
#Output:
#Totao Watts: 200 W #+5V and +3.3V total output not exceed 75W #+3.3V, +5V, and +12V total output cannot exceed 186.5W
#Dielectric Withstand: Input to frame ground 1800V AC for 1 second #Efficiency: 72% at minimum measured at nominal AC main voltage and frequency with maximum load on all output #Rise Time: Less than 20ms #Hold-up Time: 17ms minimum at nominal input voltage #Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) #Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz #MTBF: 100,000 hours on maximum load at +25°C degree #Dimension (WxLxH): 3.2 x 6 x 1.6 inch / 81.5 x 150 x 40.5 mm
Your opinion is important to us.If
you have spotted a typo, discovered an incorrect price, or encountered a
technical issue on this page, we want to hear about it. Thanks again for your
feedback
