Sparkle FSP650-802U 650W 2U Active PFC RoHS Power Supply
PS-SP6502U
Our Price
:
$ 142.99
List Price
:
$
171.99
In Stock
:
Specifications
fr Part Number: FSP650-802UR#Features: # Complied with EPS2U standard#Active Power Factor Correction Meeting with EN61000-3-2#High efficiency and reliability#Remote On/Off function#Internal 12V DC fan included#Low noise and ripple#Complies with FCC part 15 subpart J Class B and CISPR 22 Class B#Ou
Detailed Features
l> #Complied with EPS2U standard #Active Power Factor Correction Meeting with EN61000-3-2 #High efficiency and reliability #Remote On/Off function #Internal 12V DC fan included #Low noise and ripple #Complies with FCC part 15 subpart J Class B and CISPR 22 Class B #Output over voltage, short circuit, and over current protection #100% Hi-pot, ATE, and burn-in tested #Re-settable power shut down #Approved by UL 60950, CSA C22.2 Level 3, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE, BSMI #Input:
#Input Range: 95~265V AC, Full Input Range #Frequency: 47 ~ 63Hz #Input Current: 8A (RMS) @115V AC, 4A (RMS) @230V AC #Inrush Current: 50A Max for 115V AC and 50A Max for 230V AC Cold start
#Output:
#Total Wattage: 650 W #+5V and +3.3V total output not exceed 220W #+5V,+3.3V, and +12V total output power not exceed 630W #Maximum combined current for the +12V outputs shall be 45A
#Dielectric Withstand: Input to frame ground 1800V AC for 1 second #Efficiency: 70% at minimum measured at 115V AC and with maximum load on all output #Rise Time: +5V DC - 70ms maximum #Hold-up Time: 20ms minimum at nominal input voltage #Power Good Signal: Power on delay time 200~1000ms, off delay 1ms minimum (TTL and CMOS compatible) #Leakage Current: Not exceed 3.5mA at 264VAC/60Hz #MTBF: 100,000 hours on maximum load at +25°C degree #Dimensions (WxLxH): 4.17 x 11.81 x 3.24 inch / 106 x 300 x 82.2 mm #RoHS Compliant
Your opinion is important to us.If
you have spotted a typo, discovered an incorrect price, or encountered a
technical issue on this page, we want to hear about it. Thanks again for your
feedback